Here is the new Dynacorn cowl assembly. Top and bottom.

One side of the floor almost finished. Will need to do some welding underneath once I get the car on the rotisserie.

So apparently the last owner didn’t like changing oil…

Got the windows out today and started one side of the floor.
Areas around the windows look quite good for the most part, but there is some rust in the corners of the parcel shelf which may be difficult to repair.

Got the throttle body today. The quality is not as good as the billet ones, but considering it was AU$400 including postage from the US, it will certainly do the job.

Today we got the engine out of the car.
Lesson #1, never assume there is no oil left in the gearbox.

More pics available here:
http://www.winsto.net/piggie/mustang/20090816

Started the strip down today and got a fair bit done. The car is not as bad as I originally thought, but still plenty of rust to be repaired.

More pics available here:
http://www.winsto.net/piggie/mustang/20090809/