Put the torque boxes in today.
Painted them with POR-15 inside and out, so they should be fairly rust proof. I’ll fix the spots that I welded before it goes back the right way up.
During the week I will buy some P clips for the brake and fuel lines to be done next weekend.

Today I flipped the car over for the first time so I could look at the underneath.
I’ve now coated the bottom in some brush on tar sealer so the new floors look a bit neater.

I also started to fit one of the torque boxes. It needs a bit more fiddling with, but didn’t want to annoy the neighbours with my tools at night.
I bought two 6m lengths (supply and return) of aluminium fuel line and will run those next weekend while I have the car upside down. Will probably also do the brake lines while its on the rotisserie.